FERLAM COMPOSITE
FERLAM COMPOSITE
FERLAM COMPOSITE
FERLAM COMPOSITE
FErlam compensateurs
FERLAM COMPENSATEURS
ZI Roubaix Est
2 Rue du Riez d'Elbecq
59390 TOUFFLERS - France

TÉL : + 33 320 659 674
FAX : + 33 320 659 697


RUBBER MOULDED EXPANSION JOINTS :

Rubber moulded expansion joints have a perfect tightness and therefore are particularly indicated for the transport of liquid substances.
They offer strength and robustness and will last a long time. Whether it is with steel or nylon fabric reinforcement for high pressurized or inner rings for depressurized situations, they can be adapted to all on request. Used in specific situations such as used water treatment, desalinisations, liquid cooling or petrochemical transport, they offer an optimal but also quite expensive alternative. Due to the basic materials, they cannot resist to temperatures above 200°C (390°F), even not more then 110°C (230°F) for the most common quality.
There are such a various number of adaptations that it makes it difficult to number them all. Our specialists are at your entire disposal to bring you the right solution.

Ferlam joints caoutchouc

FLOATING FLANGES OR INTEGRATED FLANGES ?

Before all, it is necessary to distinguish two fundamentally different types of production: models with "floating" flanges and models with "integrated" flanges.
Models with floating flanges are generally used for diameters up to maximum 800, with relative standard and limited installation heights. They are suited for pressures to maximum PN16 (16 Bar) and maximum continuous temperatures under 110°C (230°F). Above these working conditions it is highly preferable to use models with integrated flanges. Hand and tailor-made, they offer per definition much more possibilities. Once more, all international standards and exigencies, whether it is for dimensional or quality, will be respected with care.

Model with "floating" flanges :

Ferlam joints caoutchouc

Model with "integrated" flanges

Ferlam joints caoutchouc

Basic materials:


EPDM - BUTYL - HYPALON - VITON - Etc.

Metallic flanges in:


S235JR - AISI 304, 316, 320 - Etc.

Drilling according to :


DN, PN, ANSI


Ferlam joints caoutchouc
FERLAM COMPENSATEURS