METALLIC EXPANSION JOINTS
Metallic expansion joints are an efficient solution as connection between pipe. We povide various designs adapted to your technical specifications allowing to safely absorb all dimensional changes of pipe systems and ducts. Metals are suitable for use at high temperatures up to 1200°C.
Metallic bellows are submitted to construction codes EJMA, ASME, AD Merkblatter…
Good to know
Expansion joint design depend of your technical specifications, mediums and operating conditions of your installations. It is recommended to consult us to define the best solution for your needs.
METALLIC EXPANSION JOINT IT IS...
Metal expansion joints can withstand pressures of up to 450 bar(g).
Metal bellow compensate temperature variations imposed by heat-induced and contraction of your ducts up to 1200°C.
Metallic expansion joints installed can have different shapes : round, rectangular, octogonal, oval…
Depending of design, it absorbs lateral, angular, axial or combined movements.
Metallic bellows ensure better sealing than other expansion joints.
SELECT THE RIGHT DESIGN
Axial with welding ends
Awial with welding ends, tie-rods
Axial with welding ends, inner sleeve
Axial with fixed or loose flanges
Axial with flanges, tie-rods
Lateral with welding ends
Lateral with welding ends, tie-rods
Lateral with welding ends, tie-rods and external cover
Rectangular with two bellows, mounting tie-rods
Rectangular with rounded corners
CONFIGURATION
- Single-ply bellows or multi-ply bellows
- Bellow with single or series of convulsions
- Flanges, connection ends or connectors
- Steel, carbon or stainless sleeve inner sleeve
- Transport or work tie-rods
DIAMETER
Sizes varying from DN10 to DN 15000 in all design variations
CONNECTION ENDS
- Fixed flanges
- Loose flanges
- Welding collar
- Welding ends
- Connectors
ACCESSORIES
- Sealing joint
PROPERTIES
RESISTANCE
- Temperature resistance up to 1200°C
- Presssure resistance up to 450 bar(g)
- Wide corrosive medium resistance
MOVEMENTS
-
Compression or axial elongation
-
Lateral movement
-
Angular movement
-
Combined movements
QUALITY INSPECTION
- Pressure Equipment Directive 2014/68/EU
- Material certificate to EN 10.204-3.1
- Pneumatic leak detection test
- Hydrostatic test
- Dimensional inspection
- Visual inspection
- Vacuum test
- Life cycle / Movements test
- According to EJMA, ASME, EN…
SOME ACHIEVEMENTS
